+8618007495456

Explanation of the forming process, surface treatment and cutting process by mechanical dynamic drawing (A)

Sep 27, 2021

Explanation of the forming process, surface treatment and cutting process by mechanical dynamic drawing (A)


Plastic molding

Injection molding, a method of producing shapes for industrial products. Products usually use rubber injection molding and plastic injection molding. Injection molding can also be divided into injection molding compression method and die-casting method. Injection molding machine (abbreviated as injection machine or injection molding machine) is the main molding equipment that uses plastic molding molds to make various shapes of plastic products from thermoplastics or thermosets. Injection molding is achieved through injection molding machines and molds.

v2-904764e227bfe225f87ad1b7a9fe24d3_b


Extrusion is a processing method in which the material is heated and plasticized by the action between the barrel and screw of the extruder, and pushed forward by the screw, and continuously passed through the head to make various cross-sectional products or semi-products.


v2-5021437883f1b3e294cae1cd3af785c9_720w


Rotational molding is to first add the measured plastic (liquid or powder) into the mold. After the mold is closed, make it rotate along two vertical rotation axes while heating the mold. The plastic raw materials in the mold are affected by gravity and thermal energy. Next, it is gradually uniformly coated and melt-adhered on the entire surface of the mold cavity, formed into the same shape as the mold cavity, and then cooled, shaped, and demolded to obtain a product of the desired shape.



Blow molding, also called hollow blow molding, is a rapidly developing plastic processing method. The tubular plastic parison obtained by extrusion or injection molding of the thermoplastic resin is placed in a split mold while it is hot (or heated to a softened state). After the mold is closed, compressed air is injected into the parison to blow the plastic parison It expands and clings to the inner wall of the mold, and after cooling and demolding, various hollow products are obtained.


v2-3048f6dd70ee698ac007683ac760f2ab_720w


Blister, a plastic processing technology, the main principle is to heat the flat plastic hard sheet to soften it, then use vacuum to absorb it on the surface of the mold, cool it and form it, and apply it to all walks of life.


v2-d3afb0bf85a405cef515abc3f7eb2cd9_720w


v2-99b7735aa6648a47347a67f11728129f_720w


Compression molding is an operation in which powder, granular or fibrous plastic is first put into the mold cavity at the molding temperature, and then the mold is closed and pressurized to form and solidify. Compression molding can also be used for thermosetting plastics and thermoplastics And rubber materials.


v2-b573ad39e3c9f710256bc7a15291971d_720w


Foam molding is the process of adding appropriate foaming agents to foam materials (PVC, PE, PS, etc.) to make the plastic produce a microporous structure. Almost all thermosetting and thermoplastic materials can be made into foam plastics, and foam molding has become an important field in plastic processing.



Pouring molding is a method of plastic processing. In the early casting, liquid monomers or prepolymers were injected into the mold under normal pressure, and after polymerization, they were solidified and formed into a product with the same shape as the cavity of the mold. Nylon monomer casting appeared in the 1960s. See polyamide. With the development of molding technology, the traditional casting concept has changed. Polymer solutions and dispersions refer to polyvinyl chloride pastes and melts can also be used for casting.


v2-cba1b000379b2aa021565aa2bd4d5bb7_720w


Dripping plastic technology uses thermoplastic polymer materials with variable state properties, that is, they have viscous fluidity under certain conditions, and they can restore solid properties at room temperature, and use appropriate methods and special tools to inkjet. Under the state of viscous flow, it is shaped into the designed form according to the requirements, and then solidified and shaped at room temperature.



Hringdu í okkur